LENOVO S10 SERIES LAPTOP BIOS RECOVERY STEPS

LENOVO S10 LAPTOP SERIES CRASHED BIOS RECOVERY STEPS.

The Lenovo S10 has the following specifications:

1.6GHz N270 Intel Atom Processor.
1GB PC2-5300 DDR2 SDRAM 667MHz.
Windows XP Home Edition (SP3).
10.2" WSVGA AntiGlare TFT with integrated camera 1024x600.

160GB 5400rpm hard drive.
Intel GMA 950 Integrated Graphics.
Broadcom 11b/g Wi-Fi wireless and Bluetooth.
4-in-1 Media card reader and ExpressCard slot.
3-Cell Li-ion battery.
Size: 9.8" x 7.2" x 1.2" (including feet).
Weight: 2.64 lbs (with 3-cell battery).


RECOVERY STEPS FOR LENOVO IDEAPAD S10 SERIES.

Warning: Without Battery This Process not working)
Download Bios from lenovo website:
Extract it with winrar and copy xxxx.rom file to fdd Drive or usb:
1. Put in USB Floppy Drive
2. Hold FN+R
3. plug in Power Supply (still holding FN+R)
4. Press the Power on/off Button
5. look at the USB LED its start blinking after 5-7 min its restart.

DELL 1545 LAPTOP BIOS PASSWORD RESET STEPS

DELL INSPIRON  1545 LAPTOP BIOS RESET.

PASSWORD RESET STEP FOR LAPTOP  DELL 1545.

                                           INSPIRON 1545 WITH GRAPHIC BOARD.

INSPIRON 1545 WITHOUT GRAPHIC BOARD

1.remove motherboard from you laptop.
2.connect power and turn on.
3.short G49 only one time.its shout down.
4.remove power and assemble your laptop again
5.Then go to bios by press F2.

note: This instructions for help only and for professionals only. general users do not try this.
1545 without graphics can be reset only to remove wifi cover.

Don't short G49 two times or in even count.it will show you password prompt again.

Dell bios password removal for latest models

DELL 15R-N5110 PASSWORD RESET STEPS. 

Dell Inspiration 15R-N5110 Laptop Features and Specification

Processor

2nd generation Intel® Core™ i3-2330M processor (2.20 GHz, 3M cache)
2nd generation Intel® Core™ i3-2330M processor (2.20 GHz, 3M cache)
2nd generation Intel® Core™ i5-2430M processor (2.40 GHz, 3M cache)
2nd generation Intel® Core™ i7-2670QM (2.20 Ghz, 6MB, 4C)

BIOS PASSWORD RESET STEPS.

1.remove motherboard from you laptop.
2.connect power and turn on.
3.short G2201 only one time.its shout down.
4.remove power and assemble your laptop again
5.Then go to bios by press F2.
note: This instructions for help only and for professionals only. general users do not try this.

Don't short G2201 two times or in even count.it will show you password prompt again.

COMPATIBILITY LIST OF SUPER IO IC IN LAPTOP AND DESKTOP COMPUTERS.

SUPER I/O CONTROLLERS.

SIO(SUPER I/O) is an integrated circuit on a computer motherboard that handles the slower and less prominent input/output devices shown below. When the Super input/output was first introduced in the late 1980's it was found on an expansion card, later this chip was embedded into the motherboard and communicated over the ISA bus
. As ISA began to no longer be used with computers SIO communicated over the PCI bus. Today, super I/O communicates through the Southbridge and is still used with computers in order to support older legacy devices.
Computer devices handled by the Super I/O

*Floppy disk controller.
*Game port.
*Infrared.
*Intrusion detection.
*Keyboard and mouse (non-USB).
*Parallel port.
*Real-time clock (RTC).
*Serial port (UART).
*Temperature sensor and fan speed.


SUPER I/O COMPATIBILITY LIST.

EC1	Change	EC2	Platform
ENE
KB3310QF-A0	→	KB3310QF-B0	ASUS All-in-One PC ET1602C
KB3310QF-C1	→	KB3310QF-B0	ASUS EeePC 900
KB3926QF-A1	→	KB3926QF-A2	Quanta AT3
KB3926QF-C0	→	KB926QF-D3	HP DV5
KB3926QF-C0	↔	KB3926QF-D2	Quanta OP6, QT6
KB3930QF-A2	→	KB930QF-A1	Quanta R23
KB926QF-B1	→	KB926QF-C0	Compal LA-3551P
KB926QF-B1	→	KB926QF-D3	Compal LA-6552P
KB926QF-D3	→	KB926QF-C0	Lenovo G550 – Compal LA-5082P
KB926QF-E0	→	KB926QF-C0	Compal LA-6061P
KB926QF-E0	→	KB926QF-D3	Compal LA-6311P, Lenovo G555 (LA-5972P)
KB926QF-E0	→	KB926QF-D2	Compal LA-6421P, LA-6221P
Winbond
WPCE773	↔	WPCE775
WPC8763LDG	↔	WPC8769LDG	WistronBiwa, Aspire 5920G - Quanta ZD1
WPC8769LA0DG	→	WPC8769LDG	Alienware M15x - Quanta MX3(Maddog 2.5)
nuvoTon
NPCE781LA0DX	→	NPCE781BA0DX
NPCE781LA0DX	→	NPCE783LA0DX	Quanta ZQ1
NPCE795GA0DX	→	NPCE795LA0DX	Quanta ZYG
ITE
IT8500E	→	IT8502E	ASUS K50IJ
IT8502E	→	IT8500E	ASUS K40AB, K40C, K50C, K50AB
IT8502E	↔	IT8512E	ASUS K50IJ
IT8512E	→	IT8500E	Acer 6920
IT8511TE-BXS	→	IT8510TE-GXA	ASUS X51R/RL
SMSC
MEC1300-NU	↔	MEC1308-NU	Samsung R530 (BREMEN-L3, 1.0, BREMEN-L4, r1.4), Samsung R519 (BONN-L)

TOSHIBA SATELLITE C850 BIOS PASSWORD RESETTING STEP.

TOSHIBA C850 BIOS RESET STEP.

GENERAL
Brand Toshiba
Model Name Satellite C850

PROCESSOR
Processor Core i3 (3rd Gen).
Chipset Mobile HM76 Express.
Brand Intel.
Clock Speed 2.4 GHz.
Cache 3 MB.
MEMORY
System Memory 2 GB DDR3
STORAGE
RPM 5400
HDD Capacity 500 GB
OPTICAL DISK DRIVE
Optical Drive SuperMulti DVD Drive.


STEP FOR TOSHIBA LAPTOP MODEL C850 PASSWORD RESET.

1.Open ram cover
2.Locate B500 short it for a minute
3.restart your laptop without bios password.

TOSHIBA LATEST MODEL LAPTOP MODEL C875D AND C850D PASSWORD RESETTING STEPS

TOSHIBA MASTER PASSWORD RESETTING STEPS FOR MODEL C875 AND C850D.

LAPTOP SUMMARY
AMD Dual-Core E2-1800 Accelerated Processor
Windows 8
4GB DDR3 1333MHz memory
AMD® Integrated Graphics

500GB HDD (5400rpm, Serial ATA)
DVD-SuperMulti drive (+/-R double layer)

STEP:

SHORT THE TWO CONTACTS NEAR THE BIOS BATTERY FOR RESET BIOS.

All About HDMI (High-Definition Multimedia Interface)

DETAILS ABOUT HDMI PORT

HDMI connection (High-Definition Multimedia Interface). What is it exactly? HDMI is a HD cable to connect multiple electronic devices ranging from home entertainment to the computer but the difference between an HDMI cable can replace some functions at once.
The most simple example like this, if you want to connect a DVD player with TV,

you usually need a minimum of 2 cable is a cable for audio and one cable for video. With the two HDMI cables can be combined into one, so installation is easier and no hassle. With an HDMI cable then there are some transmissions that can be done is replace the video cable, cable audio and last is the data. The presence here is not limited to HDMI cable is only as versatile but also has some advantages over regular cable that is: Has speed data transfer rates up to 10.2 GB per second that will produce quality pictures and better sound. Communication 2 directions.

HDMI is also capable of communicating in two directions so that the tool that one can interact with each other. In this case, eg, an HDTV (High Definition TV) with DVD Player, simply can communicate with each other to get the best settings so that images appear in an optimal fashion. Use an HDMI cable of course can not be used directly because previously you have to ensure that the appliance you have already support this HDMI connection. But as technology itself, an HDMI connection will become the standard connection such as a USB connection that already exist on all computers. Hdmi latest development of this technology which is marked by the launch of an HDMI ver. 1.4 is able to make an HDMI cable instead of an ethernet cable. But perhaps as a data cable, HDMI has a shortage of long HDMI cable itself is recommended between 70-30 m only, while for more than that, we need additional tools. Hopefully, this article is quite useful .

How to Put Universal Inverter for Laptops

STEP BY STEPS HOW TO PUT UNIVERSAL INVERTER BOARD IN LAPTOP.

The use of a universal inverter is an alternative way to overcome the damage to the laptop inverter. Maybe inverter Original / same, hard to come by. And if there are usually very expensive!!! Or with the aim to reduce the cost of the inverter itself.

Basically all the same laptop inverter, depending on the voltage it works. There was a 9-5V or 20V, depending on the type of laptop.
Try to look at the picture below ...

If we want to replace the inverter, so that we need to know is the position + POSITVE ; -Gnd as a source of electricity, and the ENA (enable) and DIP (to control bright / dim). Term other than ENA = Light On / DIP = Adjustment.
Then you can replace the inverter of the inverter used / universal inverter with the same voltage.
Inverter that I use to replace here, Universal inverter type, you can get it here.

In the picture is very clear, you just connect VIN = + U / ENA = ON / DIP = ADJ / GND = GND.
Not easy!!!!
Congratulations Creating .. Be careful.!!

RESET Bios Password for Acer Aspire 4715z-4315

BIOS PASSWORD RESET METHOD FOR ACER LAPTOP

If the Password on Boot field have been enabled and you forgot the BIOS password (supervisor/user
password), you will not be able to boot up the system. You need to clear the lost password by shorting the
hardware gap located near the DIMM slot.
1. Power off the system.
2. Unplug the adapter and power cable.
3. Remove the battery pack.
4. Remove the lower cover.
5. If necessary, remove the memory module.
6. Locate the hardware gap. The gap is highlighted in the illustration below.

7. Using an electrical conductivity tool, short the two contacts on the hardware gap together.
8. While resting the tool on the two contacts, plug one end of the AC adapter into the DC-in jack and plug
one end to an electrical outlet.
9. Press the power button to turn on the system.
10. After BIOS POST message, remove the tool from the hardware gap.
11. Reinstall the memory modules and lower cover.
12. Restart the system and press during the bootup to enter the BIOS setup screen.
13. Repeat above procedure if the BIOS password is not cleared.

ASUS P5QL MOTHERBOARD NORTH BRIDGE POWER SUPPLY SCHEMATIC DIAGRAM

ASUS P5QL MOTHERBOARD REPAIR SCHEMATIC.

SCHEMATIC DIAGRAM 1.8 V FOR NORTH BRIDGE .

1.IC =APW7120.

2.MOSFET=APM2512.

HOW TO ENTER SERVICE MENU CODE IN SONY TV'S

Enter service Menu For Sony Television.

Using the remote control:

Turn the TV off.

Press {DISPLAY} {5} {VOL+} {POWER ON} buttons.
or
Press {DISPLAY} {5} {POWER ON} buttons.

The Service Menu will be displayed.
Use numbers {1} and {4} to select the item to adjust.

Use numbers {3} and {6} to adjust the value of the data.

Press {MUTE} then {ENTER} to save new settings.

The words "WRITE" in red will show up in the upper right corner if saved.
Turn the TV off to exit the service menu.

Samsung Galaxy S3 i9300 Charging Jumper Solution

Samsung Galaxy S3 i9300 Charging Jumper Problem.


Samsung Galaxy S3 i9300 Charging Jumper Solution,Samsung Galaxy S3 i9300 no Charging Jumper Solution,Samsung Galaxy S3 i9300 Charging no response Jumper Solution ways diagram,Samsung Galaxy S3 i9300 Charging ways damage Jumper Solution Guide Step By Step Procedure Here.
Samsung Galaxy S3 Ringer Ways Solution .

Samsung Galaxy S3 i9300 Charging Jumper Solution,Samsung Galaxy S3 i9300 no Charging Jumper Solution,Samsung Galaxy S3 i9300 Charging no response Jumper Solution ways diagram,Samsung Galaxy S3 i9300 Charging ways damage Jumper Solution Guide Step By Step Procedure Here.

Huawei-Ascend-y530-Hard-Reset-Solution

How To Hard Reset Huawei Y530.
Huawei Ascend Y530 Pattern Lock Solution.

Remember! All Data Will Be Lost! Please Make Backup First!

1.Power Off Your Phone.

2.Press Together Volume Up + Power Key Until Huawei Logo Appears On Screen.

3.Select With Volume Keys "Wipe Data/Factory Reset".

4.Press Power To Confirm.

5.Select "Yes-Delete All Data" And Press Power Key To Confirm.

6.Wait Until Format Ends.

7.Select "Reboot" And Press Power Key To Confirm.



8.Wait Until The Phone Restarts.

Lenovo-a269i Hard Reset Solution Keys

Lenovo A269i Pattern Lock Problem.

How To Remove Pattern Lock From Lenovo A269i.

Lenovo A269i Hard Reset Keys.

How To Hard Reset Lenovo A269i



Now I Will Teach You How To Hard Reset Lenovo A269i Whenever Your Smart Phones Ended Up Displaying "Too Many Pattern Attempts" Displayed On Its Screen.



1. Turn Off You Smart Phone.



2. Press Volume Up And Power On At The Same Time Until You See Android Logo.



3. Now Go To Recovery By Pressing Volume Down.



4. Tap The Center Pad.



5. If Android System Recovery Appears Go To Wipe Data Recovery By Pressing Volume Down. Then Use Volume Up To Select Or Do The Process.



6. Select Delete All User Data As Shown On The Third Picture. Again Press Volume Up To Do The Process.



7. Then Reboot

How To Hard Reset intex-aqua-i4 Mobile

Intex Aqua i4+ Hard Reset Solution.
How To Remove Pattern Lock From Intex Aqua i4+.
Intex Aqua i4+ Factory Reset.




Performing a hard reset will remove ALL data including the Google account, system data, application data, application settings, and downloaded applications. Only perform this reset if absolutely necessary. Note: disable Automatic restore prior to performing a hard (factory) reset when attempting to determine whether a 3rd party application is the cause of an Operating System / Application issue.

How To Reset:


- Turn your device off.



- Take out any existed SIM or memory card.



- Wait for 10 seconds.



- Press and hold the Volume Up key then press the Power key.



- Keep pressing the key until Android appears.



- Use the Volume Down key to select Wipe Data / Factory Reset option.



- Use the Power key to confirm the operation.



- You need to use the Volume Down key again to select "Yes -- delete all user data"



- Use the Power key to confirm.



- After performing the hard reset, Select Reboot System Now option, And confirm it using the Power key.



- Now the phone will reboots, Wait for it to be fully on and then you can start using it.


The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.

SAMSUNG S7552 MMC SOLUTION MEMORY CARD CONNECTOR WAYS.

Samsung Gt-S7562 Mmc Solution.
Samsung S7562 Memory Card Not Working.
Samsung S7562 Mmc Connector Jumper.



Following Are The Set Of Problems As Well As Solutions Of Samsung S7562 Memory Card Problem.


Problems.



Memory Card Not Found.
Access Denied.
Memory Card Unable To Save Anything.

Manual Solution.


Remove And Reinsert Memory Card And Check.

Go Into Settings And Check Memory Card Status.


Check With Any Other Good Memory Card And Check.


Scan Memory Card For Viruses From Your Pc And Check.




Verify Proper Action Of Memory Card Slot Spring, As If It Is Damaged Then Your Phone Won't Read Your Memory Card. In This Case Replace Entire Memory Card Assembly.


If Everything Else Fails Then Format Your Memory Card.




Hardware Solution.

Pull Up Samsung S7562 Memory Card Circuit Contacts With The Help Of A Pin To Ensure That Memory Card Socket Contacts Connect With Memory Card'S Contacts.
Re-Solder All The Pins Of Memory Card Slot.
If Resolding Not Work Make Jumpers.